Any tips for grouting mosaic wall tiles?
April 13, 2009
We are about to embark on finally grouting our 10,000 plus mosaic tile design within a shower stall and are looking for tips. The tiles don't all go the same direction. Should the grout consistency be as the box specifies or not?
Should the grout be wetter or dryer than what it says on the box because I am using it on wall opposed to a floor.
Posted in Mosaic Tiles
content rss
April 13th, 2009 at 6:03 pm
make it just a little bit wetter and work it in the cracks well wait about 5 minutes and wash with wet sponge until clean and shiny
April 13th, 2009 at 6:03 pm
The two or three websites I have looked at about this subject do not mention a difference. They all just reference using the same grout you would use for regular tiles.
.
April 13th, 2009 at 6:03 pm
I have done it many times.. I follow the consistency that the box alludes to…. I always mix up the stuff(grout) and then like a pancake mixture, I spread it all over the tiles to include the grout lines.. I use a wood trowel.. I go ovesr and over the tile making sure that all the grout lines are filled… Then.. I take a moist(not WET WET WET sponge) and start cleaning the extra grout mixture off.. I keep cleaning with clean water until the tiles are clean.. then.. of course, I let it all dry.. they say for 12 hours but ME.. I let it go for a good DAY before I even attempt to use the floor or shower.
April 13th, 2009 at 6:03 pm
Use unsanded WALL grout. Follow directions. Be sure to clean up the excess as you go. Be sure you have all you need.
December 3rd, 2009 at 11:32 pm
suggest:Be sure you have all you need