Comments on: How do you remove slate tile floor from a wood sub-base? http://www.mosaicnovelties.com/how-do-you-remove-slate-tile-floor-from-a-wood-sub-base.htm Welcome to Mosaic Novelties, everything to do with Mosaic Tiles, Slate and Mosaic Home Decor Tue, 21 Jun 2011 02:04:16 +0000 hourly 1 http://wordpress.org/?v=3.2.1 By: eienmomo http://www.mosaicnovelties.com/how-do-you-remove-slate-tile-floor-from-a-wood-sub-base.htm/comment-page-1#comment-95 eienmomo Tue, 14 Apr 2009 00:51:44 +0000 http://www.mosaicnovelties.com/how-do-you-remove-slate-tile-floor-from-a-wood-sub-base.htm#comment-95 hammer and chisel would be the most time consuming way with lots of elbow grease, but wouldn't cost any money if you already own both. consider renting a chipping hammer from a tool rental place by the hour if available, or for half a day as a maximum. it'll come up in 15-20 minutes with the chipping hammer and shouldn't cost more than $50 for the half day's rental (should be cheaper i would think). do protect windows nearby and such and wear safety glasses. use the flat chisel attachment and start at the edge of the tile to be removed. go at a 45 degree angle or so and just push the chipping hammer under the tiles. don't force it, the chipping hammer will do all the work rather nicely. good luck! hammer and chisel would be the most time consuming way with lots of elbow grease, but wouldn't cost any money if you already own both. consider renting a chipping hammer from a tool rental place by the hour if available, or for half a day as a maximum. it'll come up in 15-20 minutes with the chipping hammer and shouldn't cost more than $50 for the half day's rental (should be cheaper i would think). do protect windows nearby and such and wear safety glasses. use the flat chisel attachment and start at the edge of the tile to be removed. go at a 45 degree angle or so and just push the chipping hammer under the tiles. don't force it, the chipping hammer will do all the work rather nicely. good luck!

]]> By: bigg_dogg44 http://www.mosaicnovelties.com/how-do-you-remove-slate-tile-floor-from-a-wood-sub-base.htm/comment-page-1#comment-96 bigg_dogg44 Tue, 14 Apr 2009 00:51:44 +0000 http://www.mosaicnovelties.com/how-do-you-remove-slate-tile-floor-from-a-wood-sub-base.htm#comment-96 try that or u can get a coal chisel and chip it out..... lic. gen. contractor try that or u can get a coal chisel and chip it out…..

lic. gen. contractor

]]> By: dominian3633 http://www.mosaicnovelties.com/how-do-you-remove-slate-tile-floor-from-a-wood-sub-base.htm/comment-page-1#comment-97 dominian3633 Tue, 14 Apr 2009 00:51:44 +0000 http://www.mosaicnovelties.com/how-do-you-remove-slate-tile-floor-from-a-wood-sub-base.htm#comment-97 You need to get a chisel tap it out with a hammer. Ive done it before. Make sure you put up protectors so that tile does not hit your wall/glass/doors. The tile does fly when your hitting it You need to get a chisel tap it out with a hammer. Ive done it before. Make sure you put up protectors so that tile does not hit your wall/glass/doors. The tile does fly when your hitting it

]]> By: rick m http://www.mosaicnovelties.com/how-do-you-remove-slate-tile-floor-from-a-wood-sub-base.htm/comment-page-1#comment-98 rick m Tue, 14 Apr 2009 00:51:44 +0000 http://www.mosaicnovelties.com/how-do-you-remove-slate-tile-floor-from-a-wood-sub-base.htm#comment-98 If I were doing the job, since it is a small area, I would cut the plywood with a skill saw (set at the propper depth), remove it and the replace it making sure to thoroughly glue and nail it down. Wood will flex while tile and linoleum will crack or crease. Even if you are not a "pro", time is money and wood flooring will hide any sins you might make. If I were doing the job, since it is a small area, I would cut the plywood with a skill saw (set at the propper depth), remove it and the replace it making sure to thoroughly glue and nail it down. Wood will flex while tile and linoleum will crack or crease. Even if you are not a "pro", time is money and wood flooring will hide any sins you might make.

]]>